O' DONNEL TGX1 TEMPERATURE GAUGE AND STOPWATCH

This is the O'Donnell TGX1 Temp Gauge with Stop Watch and Back Light! The O'Donnell Racing TGX1 is a non-contact infrared temperature gauge with a built-in stopwatch is specifically designed for use with R/C engines, batteries, and motors. Simply aim the TGX1 at the target and press the MEASURE button to quickly and easily display the surface temperature.

It's two engine tuning tools in one. It provides an extra level of insurance by measuring engine temperature to prevent pre-mature breakage due to overheating. Besides monitoring engine temps, the TGX-1 also has a stopwatch function that takes lap times for confirming engine perfomance and the yellow backlit LCD screen makes for easy reading at night or indoors. The built-in O-Cone helps to shield out unwanted environmental effects, and guide infrared signals directly into the sensor. Includes a long-lasting, non-rechargeable lithium battery and a protective carrying pouch that can clip onto a belt for convenience.

Features:

• Measures engine temperature in Fahrenheit (F) or Celsius (C) to help reduce damage from overheating
• Push button start and push button control for setup and measurement
• Mirrored "O" cone for point accuracy
• Probe cone helps shield against outside interference insuring more accurate readings
• 15 second data hold function
• Stopwatch function is ideal for taking lap times (.01 of a second)
• Yellow backlit LCD screen allows easy reading at night or indoors
• Auto-off feature turns unit off after 15 seconds to conserve battery power, battery level indicator
• Powered by a long lasting non-rechargeable lithium battery Adjustable emissivity
• Carrying pouch with loop for slipping through a belt

Specifications:
Temperature Range: -27° to +428°F (-33 to +220°C)
Infrared Accuracy: 4°F (2°C) or +/- 2% of reading, whichever is greater
Ambient Temperature Operating Range: +14° to +122°F (-10 to +50°C)
Adjustable Emissivity: 0.05 to 1.00 (1.00 default)
Display Resolution: 0.1°F or C
Response Time: 1 second
Field of View: 1:1 optics ratio
Battery Life: 960 (15 sec) readings or 1 hour continuous
Battery Type: CR2032 Lithium
Weight: 1.5oz (44g)
Dimensions: 3.4x1.9x0.9" (85x48x23mm)

NOTE: If your temperature gun starts to read values that appear to be off, it probably means the battery is going flat. Please replace the battery, and the readings should be accurate again. Also make sure the tip is clean, and if it gets dirty, clean it with an alcohol cleaner like Denatured Alcohol and an